MXS 10 AUS

The MXS 10 gives you state of the art technology and is ideal for professional use in workshops for caravan, RV, boat and car batteries.

56-823

Contact us

Description


For larger vehicle batteries, supply function


The MXS 10 is a fully automatic 8-step charger that delivers 10A to 12V batteries from 20-200Ah and is also suitable for maintenance charging up to 300Ah. It includes battery diagnosis to establish whether your battery can receive and retain a charge, a Recond mode for restoring and reconditioning stratified and deeply discharged batteries, a winter program for charging in cold weather and an AGM option which maximises the performance life of most Stop/Start batteries. The MXS 10 also has a temperature sensor for optimised charging and it can even be used as a power supply source for 12V equipment.

Features

  • Maintains larger batteries up to 300Ah
  • Easy to read LED display
  • Comes with Connect – Eyelet and Connect – Clamp connectors
  • Splash and dust proof (IP65)
  • Safe spark free operation
  • Reverse polarity protected
  • Short circuit proof

Technical data

Battery capacity
20–300 Ah
Charging category
AC charging
Back Current Drain, details
*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
Battery voltage
12 V
Battery chemistry
Lead acid (AGM, GEL, EFB, MF, CaCa)
Ambient operating temperature
-20 ˚C to +50 ˚C
Output
14.4/14.7/15.8/13.6 V, 10 A
Start voltage
2.0 V
Input
220–240 VAC, 50–60 Hz, 1.4 A
Ripple**
Less than 4 %
Back current drain*
Corresponding to less than 1 Ah/month
Ripple, details
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
Battery types
12 V:; WET; MF; Ca/Ca; AGM; GEL
Ingress protection
IP65
Warranty
2 years
Warranty, info
Limited Warranty
Warranty, details
CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.