MXS 5.0 TEST&CHARGE AUS

The MXS 5.0 TEST & CHARGE combines an advanced charger with the ability to easily test the battery, generator and starter motor.

56-989

Contact us

Description


Tests voltage, start power and alternator performance


The MXS 5.0 TEST & CHARGE is suitable for use with batteries from 1.2Ah-110Ah. Its testing function gives you three easy to use programs to test battery voltage, start power and alternator performance to give you a complete picture of battery and vehicle charging system health. The MXS 5.0 TEST & CHARGE also includes a patented automatic desulphation program, a special Recond mode for reconditioning deeply discharged batteries and CTEK’s patented float/pulse system, which is the most efficient maintenance mode when a battery is connected for long periods.

Features

  • Charges batteries from 1.2Ah up to 110Ah
  • Patented float/pulse maintenance phase
  • Easy to read LED display
  • Splash and dust proof (IP65)
  • Safe spark free operation
  • Reverse polarity protected
  • Short circuit proof

Technical data

Battery capacity
1.2–160 Ah
Charging category
AC charging
Back current drain*
Corresponding to less than 1 Ah/month
Back Current Drain, details
*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
Battery voltage
12 V
Battery chemistry
Lead acid (AGM, GEL, EFB, MF, CaCa)
Ambient operating temperature
-20 ˚C to +50 ˚C (- 4 °F to +122 °F)
Input
220–240 VAC, 50–60 Hz, 1.1 A
Output
14.4/14.7/15.8 V, 4.3 A
Start voltage
2.0 V
Ripple**
Less than 4 %
Ripple, details
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
Battery types
12 V:; WET; MF; Ca/Ca; AGM; GEL
Ingress protection
IP65
Warranty
5 years
Warranty headline
Limited Warranty
Warranty details
CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.