MXT 14 AUS
The MXT 14 is designed for batteries that are put under a lot of strain, making it ideal for commercial vehicles, buses, trucks and CV workshops.
Part no. 56-767
‹
›
›
Description
For heavier vehicles with 24V batteries
The MXT 14 professional 8 step 24V battery charger delivers 14A to 24V batteries from 28-300Ah and is suitable for maintenance charging up to 500Ah. Its features include battery diagnosis to establish whether the battery can receive and retain a charge, a Recond mode for restoring and reconditioning stratified and deeply discharged batteries, and a built in temperature sensor for optimised charging regardless of weather conditions. The MXT 14 also has a ‘Supply’ mode so it can be used as a 24V power source.
Features
- Fully automatic ‘connect and forget’ 8 step charging
- Patented maintenance charging up to 500Ah
- Easy to read LED display
- Safe spark free operation
- Reverse polarity protected
- Short circuit proof
- 2-year warranty
Technical data
- Input
- 220–240 VAC, 50–60 Hz, 2.9 A
- Output
- 28.8/31.6/27.2 V, 14 A
- Battery capacity
- 28–500 Ah
- Charging category
- AC charging
- Back current drain*
- Corresponding to less than 1 Ah/month
- Battery voltage
- 24 V
- Battery chemistry
- Lead acid
- Ambient operating temperature
- -20 ˚C to +50 ˚C
- Start voltage
- 2.0 V
- Ripple**
- Less than 4 %
- Battery types
- 24 V:; WET; MF; Ca/Ca; AGM; GEL
- Degree of protection
- IP44
- Warranty
- 2 years
- *) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
- **) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
- CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.
