MXTS 40 AUS

The MXTS 40 is the all in one battery charging, maintenance and support station that’s essential equipment for 12V and 24V vehicle workshops and showrooms. It’s easy to use and electronically safe, with rapid charging for all types of batteries.

40-100

Description

Technical data


Battery capacity
101200ah
Charging category
AC charging
Back current drain*
Corresponding to less than 1 Ah/month
Battery voltage
12 V; 24 V
Battery chemistry
Lead acid
Ambient operating temperature
-20 ˚C to +50 ˚C (- 4 °F to +122 °F)
Cooling
Fan
Input
220–240 VAC, 50–60 Hz, 3.0 A
Output
14.4 V, 40 A/12 V or 20 A/24 V
Start voltage
2.0 V
Ripple**
Less than 4 %
Battery types
12 V:; 24 V:; WET; MF; Ca/Ca; AGM; GEL
Degree of protection
IP20
Warranty
2 years
*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.