CT5 START/STOP AU

Description

Auto charger for vehicles with Start&Stop function

Start/Stop technology is great for the environment but it can put a considerable strain on your battery, especially if it’s in an older car. By keeping the battery fully charged, you can take full advantage of all the Start/Stop technology benefits, such as better fuel efficiency and lower CO2 emissions. If you only make short journeys, use the CT5 START/STOP once a month to keep your battery in peak condition. And if you’re going away on holiday, just connect the charger to the battery to make sure your car’s ready to go when you return.

Features

• Non sparking

Technical data

Battery capacity

14–130 Ah

Charging category

AC charging

Back current drain*

Corresponding to less than 1.5 Ah/month

Back Current Drain, details

*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.

Battery voltage

12 V

Battery chemistry

Lead acid (AGM, GEL, EFB, MF, CaCa)

Ambient operating temperature

-20 ˚C to +50 ˚C

Input

220–240 VAC, 50–60 Hz, 0.5 A

Output

14.55 V, 3.8 A

Battery types

12 V:; WET; MF; Ca/Ca; AGM; EFB; GEL

Ingress protection

IP65

Warranty

5 years

Warranty headline

Limited Warranty

Warranty details

CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.