product image
Product image Product image Product image Product image

PRO120

The CTEK PRO120 is an innovative and highly efficient 120A battery charger and power supply that’s designed to meet the demands of the diagnostic workshop. With its cutting edge design, advanced technology and state of the art features, it’s the perfect solution for comprehensive battery charging, maintenance and power supply.

Part no. 40-230

Description


120A charger and power supply for diagnostic workshops


The CTEK PRO120 restores charge and reconditions batteries using a patented multi step charging process. It’s compatible with all types of 12V battery, including normal wet/flooded, Ca/Ca and lithium*, as well as AGM and EFB Stop/Start batteries. The PRO120’s ‘adaptive charging’ mode automatically detects the appropriate settings for the battery and applies the optimum settings for the fastest charge. It’s designed to be user friendly with just four buttons and a clear, easy to read LCD display. The PRO120 is also a high power safe and stable power supply for even the most demanding diagnostic and flashing tasks. With 12.6-14.8V available in selectable 0.1V increments it can be adjusted for all vehicle manufacturer supply voltage needs with complete accuracy. *) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP)

Features

  • Easy to use with clear LCD display
  • Unique, patent applied for ‘adaptive charging’ mode automatically detects battery size
  • Built in temperature compensation
  • Rugged, impact resistant polycarbonate casing
  • 5m cables and heavy duty clamps
  • IP40 rated (indoor use)
  • Safe spark free operation
  • Reverse polarity protected
  • Short circuit proof
  • 2-year warranty

Technical data


Battery capacity
10–3600 Ah, lead-acid battery types. 15–1200 Ah, LiFePO₄.
Charging category
AC charging
Back current drain*
Corresponding to less than 2 Ah/month
Battery voltage
12 V
Battery chemistry
Lead acid; Lithium-ion
Ambient operating temperature
-20 ˚C to +50 ˚C (- 4 °F to +122 °F)
Cooling
Natural convection
Input
220–240 VAC, 50–60 Hz, 9.2 A
Output
12 V,120 A
Start voltage
2.0 V
Ripple**
Less than 4 %
Battery types
12 V:; WET; Ca/Ca; AGM; EFB; GEL; LiFePO₄
Temperature compensation
Built in temperature sensor
Degree of protection
IP40
Gross weight (unit in box)
16.02 kg
Dimensions (L x W x H)
408 x 216 x 284 mm
Net weight (unit with cables)
13.77 kg
Detachable charging cable length (ouput)
5 m
Display
LCD graphical display
USB
Type B USB 2 port for updates and service.
Warranty
2 years
Warranty, info
Limited Warranty
*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.