product image
Product image Product image Product image Product image

MXT 4.0 UK

The 8 step charger that’s ideal for smaller 24V batteries and maintenance charging for fleets with 24V vehicles.

Part no. 56-778

Description


For 24V batteries with power supply


The MXT 4.0 is a cost effective 8 step charger that delivers 4A to 24V batteries from 8-100Ah and is suitable for maintenance charging up to 250Ah. It can also be used in applications such as back-up systems, piste machinery, industrial cleaning machinery and wheelchairs. The MXT 4.0 features battery diagnosis to establish whether your battery can receive and retain a charge, a Recond mode for restoring and reconditioning stratified and deeply discharged batteries, an optimised cold charging mode and an AGM battery charging mode.

Features

  • Fully automatic ‘connect and forget’ 8 step charging
  • Can be used as a power source
  • Easy to read LED display
  • Safe spark free operation
  • Reverse polarity protected
  • Short circuit proof
  • 2-year warranty

Technical data


Battery capacity
8–250 Ah
Charging category
AC charging
Back current drain*
Corresponding to less than 1 Ah/month
Battery voltage
24 V
Battery chemistry
Lead acid
Ambient operating temperature
-20 ˚C to +50 ˚C
Input
220–240 VAC, 50–60 Hz, 1.2 A
Output
28.8/29.4/31.4 V, 4.0 A
Start voltage
2.0 V
Ripple**
Less than 5 %
Battery types
24 V:; WET; MF; Ca/Ca; AGM; GEL
Degree of protection
IP65
Dimensions (L x W x H)
191 x 89 x 48 mm
Net weight (unit with cables)
0.8 kg
Warranty
2 years
Warranty, info
Limited Warranty
*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.

Included in the box

Suitable accessories