I2440

Description

Industrial 40A charger for a variety of battery types

The I2440 can be customized with different charging curves depending on battery type and application. It also records parameters from the last 200 charging cycles for compliance. I2440 has Drive Off protection and is robust with IP64 aluminum casing. The I2440 also has intelligent cable loss compensation for even faster charging and uses advanced technology for its high frequency switch mode. With conversion efficiency up to 94%, the I2440 means low CO2 emissions and lower power usage in general.

Features

• Logging and saving 200 charge cycles
• Multi step, fully automatic charging cycle
• Charge current: 40A
• Easy to read LED indicators
• Automatic reconditioning for deeply discharged batteries
• 2-year warranty

Technical data

Battery capacity

80–1100 Ah

Back current drain*

Corresponding to less than 7 Ah/month

Back Current Drain, details

*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.

Battery voltage

24 V

Ambient storage temperature

-40 °C to +70 °C

Ambient operating temperature

-20 ˚C to +50 ˚C

Start voltage

0.5 V

Input

220–240 VAC, 50–60 Hz, 7 A

Ripple**

Less than 4 %

Output

28.8 V, 40 A

Ripple, details

**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.

Battery types

24 V:; WET; can be customized for AGM, GEL, LiFePO₄

Degree of protection

IP64

Gross weight (unit in box)

4.87 kg

Dimensions (L x W x H)

294 x 236 x 80 mm

Net weight (unit with cables)

3.0 kg

Warranty

2 years

Warranty, info

Limited Warranty

Warranty, details

CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.