MXTS 40 UK
The MXTS 40 is the all in one battery charging, maintenance and support station that’s essential equipment for 12V and 24V vehicle workshops and showrooms. It’s easy to use and electronically safe, with rapid charging for all types of batteries.
Part no. 40-099
Description
12V and 24V charging station for workshops and showrooms
The MXTS 40 has both 40A/12V and 20A/24V output, and provides selectable constant voltage settings to avoid ECU damage due to voltage fluctuation during programming. As well as the 8 step charge progress display, the MXTS 40 also has an easy to read OLED display to give you clear readouts of key charge parameters, including current, voltage and amps charged. It has a Recond mode for reconditioning deeply discharged batteries and a temperature sensor for optimised charging regardless of weather conditions. The MXTS 40 has been designed to protect vehicle electronics and is housed in heavy duty polycarbonate for rough environments. It can be used with the optional Wall Hanger Pro and Trolley Pro for secure storage and maximum portability.
Features
- Electronically safe multi step rapid charging
- 40A/12V and 20A/24V output
- IP20 classified
- Safe spark free operation
- Reverse polarity protected
- Short circuit proof
- 2-year warranty
Technical data
- Battery capacity
- 10–1200 Ah
- Charging category
- AC charging
- Back current drain*
- Corresponding to less than 1 Ah/month
- Back Current Drain, details
- *) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
- Battery voltage
- 12 V; 24 V
- Battery chemistry
- Lead acid
- Ambient operating temperature
- -20 ˚C to +50 ˚C (- 4 °F to +122 °F)
- Cooling
- Fan
- Start voltage
- 2.0 V
- Input
- 220–240 VAC, 50–60 Hz, 3.0 A
- Ripple**
- Less than 4 %
- Output
- 14.4 V, 40 A/12 V or 20 A/24 V
- Ripple, details
- **) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
- Battery types
- 12 V:; 24 V:; WET; MF; Ca/Ca; AGM; GEL
- Temperature compensation
- Temperature compensation and battery reconditioning functions.
- Degree of protection
- IP20
- Warranty
- 2 years
- Warranty, info
- Limited Warranty
- Warranty, details
- CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.