Product information

• Product information

  Get your powersport vehicle ready for action

  Peak performance charging

  Make sure you’re ready for action every time with the easy to use CT5 POWERSPORT battery charger. Get the best performance out of your powersport vehicle batteries whether you’re on land, water, snow or ice. Connect the charger direct to the battery or via the 12V CANBUS socket using the INDICATOR PLUG 12V accessory.

  Your powersport vehicle always needs to be in top condition to give you the best performance possible. Powersport vehicles are sometimes stored for long periods so the CT5 POWERSPORT battery charger makes sure your batteries are charged to capacity and your vehicle is ready to go when you are. The CT5 POWERSPORT has been designed specifically to charge and maintain powersport batteries using advanced technology to give you three fully automatic charging and maintenance programs – Normal, AGM and Recond. You can connect it directly to the battery indefinitely, if required, and it won’t over or under charge. It’s easy to use and works with all types of powersport 12V lead acid batteries.

  ;*;Suitable for all motorcycles, ATVs, Jet Skis and snowmobiles ;*;AGM program ;*;Fully automatic charging including maintenance mode ;*;Recond program for reconditioning deeply discharged batteries ;*;5-year warranty

  Technical information

  Input

  220-240VAC, 50-60Hz, 0.3A max

  Output

  14.4V/14.7V/15.8V, 0.9/2.3 max

  Back current drain*

  Corresponding to less than 1.5Ah/month

  Ambient temperature

  -20˚C to +50˚C

  Battery types

  12V:, WET, MF, Ca/Ca, AGM, GEL

  Battery capacity

  5–25Ah

  Warranty

  5 years

  Insulation class

  IP65

  User manual

  CT5_POWERSPORT-manual-UK-EN.pdf
  

  CT5_POWERSPORT-safetyinstruction-UK-EN.pdf
  

• Inside the box

  CONNECT EYELET M6 (blackcable)
  CONNECT CLAMP (black cable)
  

  Product sheet

  CT5_POWERSPORT-Productsheet-low-UK-EN.pdf
  

  FAQ

  Does POWERSPORT come with a CTEK Cig Plug accessory? See answer Minimize

  No, CONNECT Cig Plug is an accessory available at most well-equipped car accessory shops. POWERSPORT comes with 6 mm diameter CONNECT Eyelet M6 eyelets, as well as CONNECT Clamps.
  
  You can also use INDICATOR Cig Plug.

  How do I connect POWERSPORT to vehicles with a 12 V outlet? See answer Minimize

  Connect the charger first to the vehicle's 12 V outlet, and then to the power socket. This is important as it ensures that the CAN bus port is opened.

  Can I charge my car battery with POWERSPORT? See answer Minimize

  POWERSPORT is for batteries between 5 and 25 Ah in size. Car batteries are usually larger than this. We therefore recommend a larger charger for car batteries.

  What is POWERSPORT all about? See answer Minimize

  POWERSPORT vehicles are defined as sport-related motor vehicles where the driver is exposed to the elements, such as motorcycles, jet skis and quadbikes.

  How do I connect POWERSPORT to vehicles without a 12 V outlet? See answer Minimize

  Batteries installed in vehicles should be connected according to the user manual. Connect the positive clamp (or eyelet) to the battery's positive pole (or positive charger terminal), and the negative clamp (or eyelet) to the chassis (or negative charger terminal). With a free-standing battery, connect the positive clamp to the positive pole and the negative clamp to the negative pole. Then connect the power cable to the power outlet.
  
  Choose the required programme by pressing the Mode button, and the first light, "Check" shows. Charging is now under way.

  Can I charge my gel battery with POWERSPORT? See answer Minimize

  Yes – use Normal mode.

  Is POWERSPORT a simpler charger than the MXS 5.0? It has only three lights while the MXS 5.0 has eight. See answer Minimize

  No. Both chargers contain an eight-stage charging programme, but they show this differently. On the MXS 5.0 a light shows for every step, and the voltage and power curve is shown above and below the lights. On the POWERSPORT we've chosen to reduce the number of lights and instead just show which phase the charger is currently in – Check, Charge or Care. However, MXS 5.0 is a more powerful charger than POWERSPORT.

  Can I use POWERSPORT with my moped? See answer Minimize

  Yes, if your moped has a 12 V lead-acid battery between 5 and 25 Ah in size.

  POWERSPORT is correctly connected to the vehicle 12 V outlet and has charged for a while. Now the Power light is flashing. What does this mean? See answer Minimize

  The vehicle's CAN bus port is closed. The charger is waiting to start the next charging cycle. It will then open the CAN bus port again and continue with the selected programme.

  Does POWERSPORT have a temperature sensor? See answer Minimize

  No.

  What's the difference between POWERSPORT and other chargers? See answer Minimize

  POWERSPORT has an inbuilt function that opens the 12 V outlet's CAN bus system. POWERSPORT has three visible modes – Check, Charge and Care – which show where the charger is in the programme and what it's currently doing, i.e. checking battery condition, charging or caring (maintaining).

  Can I charge my ride-on lawnmower with POWERSPORT? See answer Minimize

  Yes, you can, if it has a 12 V lead-acid battery between 5 and 25 Ah in size.

  Can I use POWERSPORT as a standard charger for vehicles that don't have CAN bus? See answer Minimize

  Yes, you can use POWERSPORT to both charge and maintain the charge in any vehicle with 5-25 Ah 12 V lead-acid batteries.

  Can I connect a POWERSPORT for long-term maintenance? See answer Minimize

  Yes, you can. When the charger has completed charging, it switches automatically to long-term maintenance (Care).