CT5 POWERSPORT UK

Make sure you’re ready for action every time with the easy to use CT5 POWERSPORT battery charger. With dedicated programmes for lead-acid and lithium* batteries, you can get the best performance out of your powersport vehicle batteries whether you’re on land, water, snow or ice. *) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP)

Part no. 40-311

Description

Fully automatic charging for MC, scooters and similar vehicles.

Your powersport vehicle always needs to be in top condition to give you the best performance possible. Powersport vehicles are sometimes stored for long periods so the CT5 POWERSPORT battery charger makes sure your batteries are charged to capacity and your vehicle is ready to go when you are. The CT5 POWERSPORT has been designed specifically to charge and maintain powersport batteries using advanced technology to give you three fully automatic charging and maintenance programs – Normal: for all lead-acid batteries, including AGM, Lithium*: for all lithium* batteries and Recond. You can connect it directly to the battery indefinitely, if required, and it won’t over or under charge. It’s easy to use and works with all types of 12V powersport batteries. *)12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP)

Features

Practical and easy to use
Tests and restores battery capacity
Output: 2.3A max
Non sparking
Reverse polarity protected
Short circuit proof

Technical data

Battery capacity: 5–25 Ah
Charging category: AC charging
Back current drain*: Corresponding to less than 1.5 Ah/month
Battery voltage: 12 V
Battery chemistry: Lead acid; Lithium-ion
Ambient operating temperature: -20 ˚C to +50 ˚C
Input: 220–240 VAC, 50-60 Hz, 0.3 A
Output: 14.4/15.8/14.2 V, 2.3 A
Start voltage: 2.0 V lead-acid battery types. 5.0 V LiFePO₄.
Battery types: 12 V:; WET; MF; Ca/Ca; AGM; GEL; LiFePO₄
Degree of protection: IP65
Warranty: 5 years

*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.