PRO25SE UK

The PRO25SE is an innovative, versatile and highly efficient 25A battery charger and power supply. Supplied with 6 Metre charging cables, you can install the unit on ramp-posts or in work bays. Combining power & advanced technology with safety and compatibility to work with any 12V vehicle battery, including lithium*, it’s the perfect solution for battery charging in the professional workshop. *) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP)

Part no. 40-190

Contact us

Description


25A charger and power supply for workshops


Advanced technology will ensure that a safe, fast charge is delivered to exactly meet the needs of the individual battery. The PRO25SE has a dedicated lead-acid battery reconditioning programme to restore battery life & recondition flat batteries. SUPPLY mode will support the battery during diagnostic or fault finding work. It has low voltage & current ripple, so it’s safe for the battery & the vehicle’s delicate electronic systems. Fully automatic & easy to use, it’s also very simple to connect, spark proof and reverse-polarity protected to protect the user & also the battery. The PRO25SE is designed to ensure easy handling in both the workshop & the showroom. Whilst it’s lightweight & portable, the rugged, impact-resistant casing means it can also handle the toughest workshop environment. The PRO25SE comes with 6m cables, wall hanger and bracket.

Features

  • Integrated safety features, so it’s safe for the battery & the vehicle.
  • Built-in temperature sensor to achieve maximum charge levels
  • Fully automatic and easy to use. Simple to connect, spark proof and reverse-polarity protected.
  • Dedicated lead-acid reconditioning programme to restore battery life and recondition flat batteries.
  • IP44 classified for outdoor use
  • Lightweight & highly portable
  • Tough & robust
  • 2 year warranty

Technical data


Input
220–240 VAC, 50–60 Hz, 2.9 A
Output
14.4/15.8/13.6 V, 25 A, lead-acid battery types. 13.8 V/14.4 V/13.3 V, 25 A, LiFePO₄.
Battery capacity
40–500 Ah, lead-acid battery types. 30–450 Ah, LiFePO₄.
Charging category
AC charging
Back current drain*
Corresponding to less than 1 Ah/month
Battery voltage
12 V
Battery chemistry
Lead acid; Lithium-ion
Ambient operating temperature
-20 ˚C to +50 ˚C
Cooling
Fan
Start voltage
2.0 V
Ripple**
Less than 4 %
Battery types
12 V:; WET; MF; Ca/Ca; AGM; EFB; GEL; LiFePO₄
Degree of protection
IP44
Gross weight (unit in box)
3.9 kg
Dimensions (L x W x H)
235 x 130 x 65 mm
Charging cable length (output)
6 m
Net weight (unit with cables)
3.2 kg
Warranty
2 years
*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.

Documents

PRO25SE-manual-low-UK-EN.pdf

PRO25SE-safetyinstruction-low-UK-EN.pdf

PRO25SE-productsheet-low-UK-EN.pdf

Included in the box