SMARTPASS 120S
Smartpass 120S charges and supplies the service battery and equipment with 120A, separates critical equipment from non-critical equipment ensuring that radio, emergency lights and navigation systems always have power.
Part no. 40-289
‹
›
›
Description
Power management system for starter and service batteries
Smartpass 120S is a 120A Power Management Solution which distributes, controls and maximises the available energy from your alternator to power service batteries and consumers. SMARTPASS 120S handles all 12V batteries between 28-800Ah. The Smartpass 120Ss Battery Guard function ensures that critical equipment such as radio, emergency lights and navigation systems always have power and take priority when the voltage on the service battery is low disconnecting non-critical consumers. The unit’s Battery Guard will protect your service battery from total discharge and built in over temperature protection reduces charge current before the battery temperature gets too high. SMARTPASS 120S is compatible with the D250SA and D250SE 20A on board chargers.
Features
- Battery separation eliminates diodes and VSR relays
- Fully automatic
- Maximizes battery life
- Battery Guard to protect your secondary battery from total discharge
- Dynamic over current protection to handle temporary inputs and outputs of up to 350A for fast charging
- Battery temperature protection for added safety
- Splash and dust proof (IP65)
- 2-year warranty
Technical data
- Battery capacity
- 28–800 Ah
- Charging category
- DC charging
- Back current drain*
- Corresponding to less than 7 Ah/month
- Battery voltage
- 12 V
- Battery chemistry
- Lead acid; Lithium-ion
- Ambient operating temperature
- -20 ˚C to +50 ˚C (- 4 °F to +122 °F)
- Input
- 11.5–23 V, 120 A (350 A temporarily for 10 seconds)
- Output
- 120 A (350 A temporarily for 10 seconds)
- Battery types
- 12 V:; WET; MF; Ca/Ca; AGM; EFB; GEL; LiFePO₄
- Degree of protection
- IP65
- Gross weight (unit in box)
- 0.9 kg
- Dimensions (L x W x H)
- 192 x 110 x 65 mm
- Net weight (unit with cables)
- 0.7 kg
- Warranty
- 2 years
- Warranty, info
- Limited Warranty
- *) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
- CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.
