product image
Product image Product image Product image Product image

PRO60

The CTEK PRO60 is an innovative and highly efficient 60A battery charger and power supply that’s designed to meet the demands of the modern workshop. With its cutting edge design, advanced technology and state of the art features, it’s the perfect solution for comprehensive battery charging, maintenance and support.

Part no. 40-150

Description


Professional 60A charger with variable power supply incl. 12V LiFePO4


The CTEK PRO60 restores charge and reconditions batteries using a patented multi step charging process. It’s compatible with all types of 12V battery, including normal wet/flooded, Ca/Ca and Lithium (LiFePO4), as well as AGM and EFB Stop/Start batteries. The PRO60’s ‘adaptive charging’ mode automatically detects the appropriate settings for the battery and applies the optimum settings for the fastest charge. It’s designed to be user friendly with just four buttons and a clear, easy to read LCD display. The PRO60 is also the perfect stable power supply, with 12.6-14.8V available in selectable 0.1V increments. This ensures that no damage can occur to sensitive vehicle electronics.

Features

  • Easy to use with clear LCD display
  • Unique, patent applied for ‘adaptive charging’ mode automatically detects battery size
  • Two power supply modes for diagnostic or showroom use
  • Built in temperature compensation
  • Rugged, impact resistant polycarbonate casing
  • 5m cables and heavy duty clamps
  • IP40 rated (indoor use)
  • Safe spark free operation
  • Reverse polarity protected
  • Short circuit proof
  • 2-year warranty

Technical data


Battery capacity
10–1800 Ah, lead-acid battery types. 15–600 Ah, LiFePO₄.
Charging category
AC charging
Back current drain*
Corresponding to less than 2 Ah/month
Battery voltage
12 V
Battery chemistry
Lead acid; Lithium-ion
Ambient operating temperature
-20 ˚C to +50 ˚C (- 4 °F to +122 °F)
Input
220–240 VAC, 50–60 Hz, 4.6 A
Output
12 V, 60 A
Start voltage
0.8 V
Ripple**
Less than 4 %
Battery types
12 V:; WET; Ca/Ca; AGM; EFB; GEL; LiFePO₄
Temperature compensation
Built in temperature sensor.
Degree of protection
IP40
Gross weight (unit in box)
10.1 kg
Dimensions (L x W x H)
227 x 216 x 284 mm
Charging cable length (output)
5 m
Cable Area
16 mm2
Net weight (unit with cables)
8.6 kg
Display
LCD graphical display
Test range
100–900 CCA 100–550 DIN 100–900 EN 100–550 IEC 100–900 SAE
USB
Type B USB 2 port for updates and service.
Warranty
2 years
Warranty, info
Limited Warranty
*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.

Suitable accessories