LOAD BALANCING LICENCE | HOME

Avoid overload and tripped fuses in your self-contained house by installing the load balancing kit for CHARGESTORM® CONNECTED 2 EV charger from CTEK. The kit contains an energy meter that measures total power consumption of the house. The CHARGESTORM® CONNECTED 2 EV charger receives (via Modbus communication) the measured power from the energy meter and adjust charging power to the vehicle according to what is available at that point of time. The Energy meter is installed in the distribution panel of the house and connected to the CHARGESTORM® CONNECTED 2 EV charger with a standard Ethernet cable (the Ethernet cable is not part of the kit).

Part no. 40-466

Quotation request

Description


Avoid overload and tripped fuses in your self-contained house

Features

  • One electricity meter (max 65 A) including an integrated RJ45 connector (The energy meter must be installed on the incoming power feed).
  • One separate RJ45 connector which is connected to the control unit in the EV charger, by the electrician.
  • Installation manual

Technical data


Load balancing
NANOGRID™
Dimensions (L x W x H)
55 x 90 x 65 mm
Weight
0,3 kg

Documents

LOAD_BALANCING_LICENCE_HOME-productsheet-low-UK-EN.pdf

Are you interested in buying our EVSE products, or would you like more information? ✕

Thanks for you message. We will reach out to you as soon as possible.

Your email or phone number is invalid, one of them is required.

I accept the CTEK policy for integrity and GDPR